Signal Level Meter The ST-4000D is our new hand-held signal level meter that has been fine tuned to handle the basic needs of maintaining RF distribution systems. Its rugged design and protective carrying case make it a perfect choice for everyday use. Features: Full Bandwidth Operation (CATV: Ch. 2-136, Off-Air: 2-69) * Analog, Digital ATSC, 8VSB Measurement * Wide Dynamic Range (-28 to +55dBmV) * Signal Level Measurements (Aural and Visual Carriers) * Direct Channel or Frequency Entry Group Channel Selection * (For quick system tests just push a button and read only the favorite channels) * Leather Case Specifications

Signal Level Meter (ST-4000D) $419.00

Dark Meter System The Holland Dark Meter and companion transmitter make it possible to sweep RF distribution systems before CATV / satellite signals are present. This pre-signal testing verifies if connections are correct, if all passives and cables are passing signals, and if not, where an open or short circuit exists. The measured signal attenuation levels for up to 50 separate stations can be stored in memory. A built-in RS-232 port allows the user to download this data from the meter to a remote device at the push of a single button. Features: Generates Five Carriers: 20, 55, 950, 1450, and 2150 MHz. * Verifies Cable Attenuation Cable ID Function (Using PFT Terminators) * TDR to Detect Cable Length and Distance to Shorts * Stores Up to 50 Locations * Data Downloadable Via RS-232 * Rechargeable Li-Ion Battery * Durable Neoprene Case Specifications

Dark Meter System (DST-5000, DSTR-5000) $569.00

Cable Ringer Tones out cables by inserting a DC current into a coaxial cable at one end and detects that cable from others in a remote location by attaching the audio toning device to the other end. Features: Improved Head Design with Rugged Push-On Male F Connector * Easily Viewable Short Circuit Indicator * loud Audio Level fo Noisy Enviroment * Time-Saving Push-On Female Connector on Audible Toner * Easily Stores in Shirt Pocket or Tool Pouch * Uses one Standard AAA Battery

Cable Ringer (TSTL-3A) $27.40

Cable Identifier System
	The PFTK System allows the MDU installer to identify up to 20 locations or cables by installing coded push-on terminators in an apartment or routing box location and then identifying, electronically, the correct cable at the other. The PFT-A adapter plugs into your VOM set to ohms, (50k ohm setting or greater) and reads the correct terminator code as the first 2 digits on your meter.

Cable Identifier System (PFTK) $24.22